---

Offer

Systems of winter gardens

MB-WG60

produkt

The system is intended for building Winter Gardens as well as other structures like hothouses, porches or ateliers (hobby rooms). This type of the structure is assumed to give a new quality to the living space, with light coming from the top which gives the optimum lighting to the room and assures the appropriate climate of the interior.

The system of winter gardens was designed taking basic requirements of the users into account, due to the demanded interior aesthetics.

The basic supporting profiles i.e. the rafters are shaped from the exterior side in the form of the inverted T ended with a radius equal to 20 mm. In order to increase the roof resistance, there exists the possibility to reinforce the profiles with the additional aluminium or steel elements. Rafters are connected with purlin profiles and the hinge profiles supported on the eaves beam and the wall beam in a cascade way, what enables the proper water drainage and allows the effective ventilation of the room. The roof inclination angle is equal to 7°-45° from the horizon.

The MB-WG60 system profiles have a very good thermal insulation and a high resistance, due to application of the special thermal cell interlayer plates.

The EPDM membranes and the HPVC profile thermally protect the area of the glass panel corner, which is especially susceptible to the influence of a low temperature.

In order to provide the effective rainfall drainage from the roof and the condensate from the interior side of the building, the system is equipped with an internal gutter integrated with the eaves beam profile and the hinge profile, and the external gutter separable from the eaves beam, what enables change of the winter garden appearance.

The structure gives the possibility of glazing within the range of 24-36 mm. The system allows using the MB window/door in-fills as well as other elements available in the market, such as plastic, wooden systems and other.

More information about this system you can find here

 

MB-SR50

produkt

The mullion-transom curtain wall

Thanks to the rich offer of profiles, the architects and designers designing enginners may realize even the most bold concepts as regards the aluminium-glass structures.

The system is intended for constructing and creating the light-weight curtain walls of hanging and filling type, as well as roofs, skylights and other structures. The shape of mullions and transoms allows building aesthetic facades with visible narrow dividing lines, ensuring the structure durability and resistance at the same time. Additionally, the profiles have rounded external edges, what gives the so-called soft-line effect.

The large number of mullions and transoms available in this system guarantees the best possible aluminium use. The economic profiles were obtained by optimization of the intersection shape and by selecting the optimal wall thickness. At a very high load, all mullions may be additionally reinforced with typical internal aluminium profiles, increasing their resistance. The simple profile processing lowers the workload and eliminates all types of carvings at the side surfaces of the mullions.

Application of the thermal break made of insulating material HPVC and the glazing gaskets made of EPDM allows achieving the appropriate class of thermal insulation.

Thanks to the sandwich structure of the lintel-window sill strip, in which the non-flammable materials such as mineral wool and plaster boards are used, the fire resistance classification was obtained depending on the construction of F0.25(EI15)NRO, F0.5(EI45)NRO.
For construction of the broken walls in horizontal and vertical section, the special overlay profiles as well as appropriately shaped clamping and cover beads are available, what eliminates the restrictions in shaping the building mass as well as the necessity to use special angular mullion. The accessories delivered with the system, aluminium supporting elements and connectors fixing the wall to the building surface are made of AlMgSi0.5F22 aluminium alloy.

In facades based on the MB-SR50 system, various shapes of cover beads can be applied. The aesthetic variation of this is the so-called horizontal and vertical line, where the horizontal or vertical divisions are emphasized. This system constitutes the base also for other solutions: “semi-structural” wall MB-SR50 EFEKT, the “Industrial” type of façade, structures applied with the overlay method on the supporting wood or steel framework (MB-SR50 A). In all those variants, apart from standard opening elements, it is possible to use skylight windows and tilt windows, basing on the structural wall system MB-SG50.

More information about this system you can find here

 
 
ALU-PRESTIGE POLAND LTD.
Grunwaldzka 9
82-500 Kwidzyn
Poland

phone: +48 55 615 10 15
fax: +48 55 621 12 99
mobile: +48 790 555 355

mail: biuro@alu-prestige.pl
www.alu-prestige.pl